Home ﹥ Products > Product > Accessories
T-Coil Electronic Hearing Aid System, there are including External PTT/Microphone, Earphone, Multi connect cable.
Feature:
＊ Suit forAll Mobile phoneorTwo Way Radio application.
＊ Plug & Use, don’tnecessary to pairing beforeusing.
＊ No Interference problemduring operation.
＊ Lowcost ofwireless Earphone/Microphone/PTT accessory
＊ Multi connecting which beused forTwo Way Radio,
Mobilephone& Scanner& easy switchable.
＊ Invisible Receiver can beused forListening Assistant,
Scannerorspecialapplication.
Technical Specification:
General | |
Driver mode | Magnetic Field with high efficient loop antenna |
Operating Temperature Range | -25°C to+50°C |
Power Supply | Tx doesn't need power except the mobile phone orother small sound source to boost the power |
Connecting Cable | I-phone phone cable, Moto, Kenwood, Icom,CTE & other plug |
Transmitter: | |
Dimensions | 45(H)X26(W)X15(D)mm |
Weight | About 45g (Including loop antenna & cable) |
Distortion | Less than 5% |
Audio Frequency Response | 50Hz ~ 10KHz |
Signal to noise ratio | > 45db |
Receiver: There are several RX can choose by different application | |
Power Supply | RX: 3.7V or similar power by case |
Dimensions | 30(H)X17(W)X16(D)mm |
Weight | About 20 g (including battery) |
Distortion | Less than 5% |
Audio Frequency Response | 50Hz ~ 10KHz |
EX-PTT with T-Coil Earplug
Feature:
＊ Hearing Protect & Noise Reduction for noise environment application.
＊ Plug & Use, no pairing problem before using.
＊ No Interference problem during operation.
＊ Low cost solution for wireless earphone/microphone.
＊ Multi connecting be used for Mobile phone, different type Two Way Radio & others similar device.
＊ Compare to use with other T-Coil device.
＊ Invisible Earphone be choose by option.
Technical Specification:
| EX-PTT-TC |  |
| Driver Mode: | Magnetic Field with high efficient loop antenna |
| Operating Temperature Range: | -25°C to+50°C |
| Power Supply: | From Two Way Radio |
| Connecting Cable: | Suit for CTE, Moto, Kenwood, iCOM, radio with different external plug |
| Dimensions: | 45(H) x 26(W) x 15(D) mm |
| Weight: | About 45g (Including loop antenna & cable) |
| Distortion: | Less than 5% |
| Signal to Noise Ratio: | > 45db |
| Audio Frequency Response: | 50Hz ~ 10KHz |
| T-Coil Earplug |  | |
| Model number: | HAE-1 | |
| Operating Temperature Range | -25°C to+50°C | |
| Operating time (one charge) | About 12 hours | |
| Electronic Power on/off LED indicator | ||
| Charging indicator | Two LED indicator | |
| Power Supply | RX:3.7V Li-polymer rechargeable battery | |
| Dimensions | 29 (L) x 25 (W) x 15 (T) mm | |
| Weight | About 5g (w/battery) | |
| Distortion | Less than 5% | |
| Audio Frequency Response | 100Hz~10KHz | |
| Audio Output Power | 6mW(preset) | |
| Signal to noise ratio | > 45db | |
| Current Consumption | Standby:< 0.5mA | |
| Operating(Maximum output):<10mA | ||
Are you interested in this product Please contact us.
Bluetooth Dongle BT-D2A-P / BT-D9A-P
BT-D9_PTT General Specification:
| Bluetooth Compliance: | Bluetooth Specifications Version 4.0 |
| Chipsets: | CSR8670 |
| Supported Profiles: | GAP, SPP (Serial Port Profile), AG(Audio Gateway). |
| Frequency Band: | 2.4GHz ISM Spectrum;Frequency hopping 79 Channels. |
| Modulation: | GFSK(Gaussian Frequency Shift Keying); 1 Mbps. |
| RF Power: | Class 2, 0-4dBm |
| Receivers Sensitivity: | -86 dBm at 0.1% BER |
| Current drain: | 30 mA |
| Operating Range: | Up to 10m (Line of Sight). |
| Security: | Security Mode 3(Pairing, Encryption, Authentication). |
| Power Source: | From Radio Via I/O pin(re-chargeable battery pack is optional). |
| Compatibility: | Support Bluetooth V2.1(and above),PELTOR HF and HS profile additions. |
| Other Specifications: | IP54 Spec |
| Pairing Code: | Default PIN code 0000. Dongle can stores IDs up to 5 previously paired devices. |
| Physical dimensions: | 59.5*19*15.6mm |
Are you interested in this product Please contact us.
